 |
 |
 |
|
Kasco Marine VFX Series Aerating Fountain 5.3VFX150
5 HP, 208/240V, 3 Phase, 150' Cord. Pattern 9'H x 34'W
Operation
- Submersed motor with top intake draws water into the fountain housing and pushes the water past the deflector disc and into the air
- Individual water droplets absorb oxygen from the atmosphere and return to the body of water transferring oxygen from the air and into the water
- Moving water mixes and agitates the water spreading oxygenated water throughout the body of water
- Single propeller and deflector disc designs allows for greater water flow with a lower likelihood of clogging
- Thermoplastic bottom screen helps protect the motor from clogging
Quick Facts
- Complete Package is fully assembled and inludes motor unit, power control panel, UV resistant high density thermoplastic float, three 15' braided nylon mooring lines and SJTOW rated 3 wire power cable
- Operates in 26" (66cm) of water
- Total component listed by ETL to meet UL and CSA standards for safety in water
- Sacrificial Zinc Anode installed for corrosion protection and use in salt water applications
- Series 300 Austenitic stainless steel construction of exposed metal; salt water compatible
- 3 year warranty
- UPS Shippable
- Power cable potted quick disconnect on 12 guage cord options with stainless steel strain relief
- Optional bronze halogen lighting or LED lighting available
- Energy efficient with excellent GPM/kW rates
- Industrial strength design
- Top intake for shallow water operation
- Bottom screen included
Float
- U.V. resistant high density thermoplastic
- 3-piece lap joint float
- Protective coated series 300 stainless steel hardware
- Protective coated, 300 series stainless steel top and bottom screens with additional 3/4" mesh bottom screening
- Three 50' braided nylon mooring ropes
Fountain Components
- 3 blade engineered thermoplastic propeller with Series 300 Stainless Steel insert and all blades on the same plane
- UV resistant thermoplastic draft tube and fountain disc with Series 300 stainless steel hardware
Motor Unit
- 5 HP, 208/240V, 3 phase
- 1750 RPM motor
- Oil cooled, continuous duty rated
- Two long life bearings
- Thermal overload protection
- Fully unitized heavy duty carbon ceramic mechanical seal
- Series 300 austenitic stainless housing with engineering grade thermoplastic top
Power Cable
- SJTOW UL, CSA & NEC approved underwater rated cable
- 4 wire
- Available in 50', 100', 150', and 200' for 120V
- Available in 50', 100', 150', 200', 250', 300', 400' for 240V
- Potted quick disconnect and stainless steel strain relief standard on 12 guage cords
- 6' flex sleeve protection
Optional Lighting
- 2 or 3 ETL approved bronze, halogen 75W, MR-16 fixtures with thermal over load protection
- 3 or 6 light LED, sealed fixtures with quick connect splitter and no bulb changing
- For more information browse through the available light packages below the specification tables below
Control Panel
- U.L. listed industrial controller
- NEMA 4x/3r non-metallic enclosure
- 5ma personnel GFI protection
- Surge protector
- Motor starter with adjustable over-load
- Hand-off-auto-switch
- Two 24 hour timers
- Angled terminal block for wiring
2.3VFX 240V Specifications
|
Model
|
hp
|
cord length
|
cord gauge
|
voltage phase hz
|
running amps
|
Lock Rotor Amps
|
pond size (s.a) |
Min. Depth of Operation
|
Shipping Weight
|
| 5.3VFX100 |
5 |
100' |
14/4 |
240/3/60 |
16 |
97 |
Up to 2.5 |
26" |
192 lbs. |
| 5.3VFX150 |
5 |
150' |
12/4 |
240/3/60 |
16 |
97 |
Up to 2.5 |
26" |
213 lbs. |
| 5.3VFX200 |
5 |
200' |
10/4 |
240/3/60 |
16 |
97 |
Up to 2.5 |
26" |
242 lbs. |
| 5.3VFX250 |
5 |
250' |
10/4 |
240/3/60 |
16 |
97 |
Up to 2.5 |
26" |
261 lbs. |
| 5.3VFX300 |
5 |
300' |
8/4 |
240/3/60 |
16 |
97 |
Up to 2.5 |
26" |
364 lbs. |
| 5.3VFX400 |
5 |
400' |
8/4 |
240/3/60 |
16 |
97 |
Up to 2.5 |
26" |
422 lbs. |
Optional Lighting Packages
HALOGEN LIGHTING
|
|
|
 |
|
 |
|
|
|
