Home > Pond Liners > Liner Seaming & Repair >

100' EPDM Seam Kit
100' EPDM Seam Kit
See details below


 
Our Price: $200.00
Sale Price: $180.00
Savings: $20.00

Quantity in Stock:78


Availability: Ships within 24 hours
Product Code: 4328
Qty:

Description
 

100' EPDM Seam Kit

Includes Seam Tape, Primer, Lap Sealant, Seam Roller & Primer Brush

There are lots of reasons why you may need to seam 2 pieces of EPDM together...and we have the supplies and expertise to make the whole process, well seamless! Our professional seam kits include all of the materials used by water feature pros to join 2 pieces of EPDM for an exceptionally large project, add on to an existing pond or attach a stream liner to the main pond. Our simple, straight forward step by step instruction are included below.


Includes:

  • 3" x 100' EPDM Seam and Splice Tape - cured, self adhering double sided stick, butyl adhesive
  • 1 pint EPDM Primer / Splice Wash
  • (3) Tubes 10oz Black EPDM Lap Sealant
  • 1 1/4" Seam Roller
  • 3" Paint Brush

Seam Repair Instructions


Step 1: Layout the Liner
Layout the sections of liner to be seamed. Overlap ends 6" - 12"


Step 2: Clean the Seam Area
Lift the top liner. Use gasoline and thoroughly clean the seam area


Step 3: Mark the Seam Area
With the top liner down, use a crayon or lightly score with scissors, the seam area on the bottom liner. Raise the top liner in the preparation for priming


Step 4: Prime the Seam Area
Prime both liners. On the bottom liner, prime an area 1/4" above the mark, approximately 6" - 8" wide. Prime a matching area on the top liner


Step 5: Apply 3" Double Stick
Apply 3" of double sided tape to the bottom liner, pressure rolling as you go to eliminate air bubbles or wrinkles


Step 6: Smooth the Seam
With the double stick paper still on, replace the top liner and pressure roll the seam


Step 7: Seal the Seam
Slit the double stick tape at the middle of the run of the seam. Overlap the liners and carefully remove the paper, pulling off the tape from between the liners at a 45 degree angle, one side at a time


Step 8: Apply 6" Single Stick
Prime an area 6" wide spaced evenly over the exposed edge of the seam. Apply 6" tape over primer


Step 9: Roll and Seal Forever
Thoroughly pressure roll the 6" tape and generously apply lap sealant along both edge of the 6" tape


Step 10: Apply 6" Single Stick
Allow the seam to dry thoroughly before contact with water



Accessories
Half Off Ponds Water Treatments Beneficial Bacteria 32 oz. Bottle - H2OP-BB032OZ
Sale Price: $28.80

Add
Half Off Ponds Water Treatments Beneficial Bacteria 32 oz. Bottle - H2OP-BB032OZ

Share your knowledge of this product. Be the first to write a review »